AR-15 5.56 Upper Battleship Grey Iowa Class Mark 7

$450.00

When it comes to the custom Cerakote AR-15 rifles, one in Battleship Grey is probably the coolest! The Iowa class battleship with nine 16″ (406mm) guns could sling 2,700 lb armor piercing or 1,900 lb high explosive shells about 23 miles.. Unfortunately our 16″ gun doesn’t do that… But at least you will look cool, like a battleship, with our AR15 5.56 Upper Battleship Grey Iowa Class Mark 7 that will shoot 1 MOA at 100 yards with factory ball ammo! Get one. Do it.

Our billet upper is made locally in Phoenix, in our facility. We start off from a solid block of 6061 aluminum and CNC it down to spec.  A billet is much harder and more consistent than forged. Forged has a tendency to crack and loosen through wear and tear over time, while billet will last 5x longer than a forged upper.  We now include all of our uppers with super durable billet.  We Type 3 hard coat anodize our aluminum to make it almost as hard as steel.

Our Barrel nuts are cut from bar stock carpenter 4140 steel and milled out, giving you a better than mil-spec hold for your barrel extension.  We torque our barrel nuts 40-80 lbs onto our uppers, giving no chance of loosening while you shoot.

This handguard is made with 6061 aluminum extrusion that we CNC to meet our strict standards with top quality tooling.  The top rail is Mil-spec, as are the M-LOK slots.  This is a total length of 15” that leaves about an inch of the barrel (including the threads).  We now use steel barrel nuts that can take greater torque specs while not adding too much weight.  We pride ourselves on quality and safety, so our 15” handguards allow you to properly grip your rifle (or pistol) while still leaving lots of room to mount an angled grip, flashlight, laser, and a variety of accessories.

Our 5.56 (also shoots .223) 16” nitride barrels are 4150 Chrome Moly Vanadium (ChMV). Chrome, molybdenum, and vanadium are impurities added to the barrels, that react positively with the nitriding process with fewer imperfections and a smoother finish.  By not lining our barrels with Chrome, we can keep our smooth bore intact as we do the Nitriding process.  The result is a more accurate barrel.  Our barrels should give you at least a 1” grouping at 100yards.  Most of our barrels shoot Sub-MOA, which means under 1” even with ball ammo.  The average for this barrel is 1/2” grouping at 100 yards.  This barrel is good for 15,000 rounds before you will see a drop in accuracy. A 1:8 twist is what we find is the most versatile for the common grain bullets. Lastly, we use Nickel Boron on our barrel extension for the utmost smoothness and durability since this is high wear and tear piece.

Basics

  • Cerakote Grey Upper Set
  • Fake Suppressor Flash Hider
  • Super Light Handguard
  • 16″ Nitride 1:8 Twist 5.56 Barrel

Upper

  • Cerakote Battleship Grey
  • M4 Feed Ramps
  • T6 6061 Billet
  • US Made In Scottsdale, Arizona
  • 1913 Picatinny Rail Flat Top
  • Matches To Any AR-15 Lower

Handguard

  • US Made
  • Internal Diameter: 1.34″
  • T6 Aluminum Body
  • Ultra Lightweight
  • Cerakote Battleship Grey
  • 15″ Length
  • Heavy Duty
  • M-LOK on All 4 Sides
  • Proprietary Lightweight Steel Barrel Nut Included
  • Total Weight Including Barrel Nut Is 8.4 oz

Barrel

  • 1:7 Twist
  • 16″ Nitride CrMoV (Chrome Moly Vanadium)
  • Gatling Style Fake Suppressor With Muzzle Brake
  • Midlength Gas System
  • Nitride Gas Block

Additional Information

  • Limited Lifetime Warranty
  • All You Need Is A Lower, Lower Parts Kit and BCG Plus Charging Handle To Complete The Rifle
  • BCG Not Included (109.95 Extra)
  • Headspace Verified

Reviews

There are no reviews yet.

Be the first to review “AR-15 5.56 Upper Battleship Grey Iowa Class Mark 7”

Your email address will not be published. Required fields are marked *